G6.35, GX6.35, GY6.35, GZ6.35 (2024)

FAQs

Is G6 35 same as GY6 35? ›

Bi-pin light bulb spacing is indicated by the number following the “G” on the base code. You'll notice that G6. 35 and GY6. 35 bases have the same spacing, but they are differentiated by the size of the pins, which have slightly different diameters.

The G6. 35 lamps have the pins slightly further apart at 6.35mm as opposed to the 4mm separation of G4 bulbs. They can either be 12 volt or mains voltage 230VAC operation so check you get the correct ones.

A G4 light bulb is a bi-pin base lamp that runs off a low-voltage power supply. “G4” is a base designation which means the base has two pins and the gap width between the pins (center to center) is 4 millimeters. The G4 light bulb finds its usage in a variety of applications where space is a premium.

But there are spring plates inside the lamp holder, So g6. 35 and gy6. 35 are interchangeable.

While GU4 LEDs have an MR11 lamp shape, G4 LEDs belong to the pin-base lamps. Both G4 and GU4 LEDs have 2 pins that are 4 mm apart. Both product groups work with 12 volts.

Honda's KCW125 (the commercial name in Japan is "Spacy") was modified by Taiwan's Kwang Yang Motor Co., Ltd. (KYMCO), under Honda's consultancy, and became a standard model called the GY6, which various Taiwan makers imitated and minor-changed.

A G4 LED bulb is not always the same size as a G4 halogen bulb. If you have found the right product, the 1-to-1 replacement is very simple. First switch off the power. Then remove the old G4 halogen spot from the fixture.

The numbers of the bulb indicate its base size, which is based on its diameter at its widest point, measured in eighths of an inch (⅛”). For example: An A19 bulb indicates that the bulb comes in a standard household shape (code A), and the '19' indicates that the base is 19/8ths inches in size.

Yes, you can replace a 35w bulb with a 55w bulb if the fixture's maximum wattage allows it. Ensure the voltage matches and the socket can handle the increased heat output.

How wide is an R16 bulb? ›

R16 Light Bulb – An R16 bulb uses its reflective inner surface to concentrate light forward. Its diameter, as denoted by the “16”, is 2 inches. This compact size combined with its directional lighting capability makes it a preferred choice for track lighting, recessed cans, or spotlights in both homes and businesses.

Most G4 LED bulbs operate on DC voltage, so some people require a transformer or a new transformer so they can work them. A great reason for replacing a G4 halogen with an LED G4 is that they can help you reduce your energy consumption by around 88%.

G4 LED capsules are a great replacement for halogen bulbs, they produce less heat, have a longer life expectancy and are more energy efficient.

Type G bulbs, or globe lights, are the ones you normally see on vanity lighting or around mirrors. They are big and bright and a great choice for bathrooms and bedrooms. They range in size from G25 to G40.

The GY6 engine design is a four-stroke single-cylinder in a near-horizontal orientation that is used on a number of small motorcycles or scooters made in Taiwan, China, and other southeast Asian countries.

G4 Bulb. A G4 bulb is similar to GU5. 3 as it also has two-pins that are thin and small to connect into a lamp, however the difference is that it is usually used for decorative and atmospheric lighting.

Xenon light is 300 times brighter than Halogen. Xenon can last 10 times longer than Halogen. Xenon produces a cleaner, whiter light than a 55w Halogen bulb. Xenon light is whiter, bluish light whereas Halogen is more yellowish.

A: Hello Jonathon, GX5. 3 base is the same pin with GU5. 3 and MR16, Please confirm your fixture is 12V DC/AC output, then it will work fine.