GY6.35 Halogenlampen (2024)

FAQs

Is GY6 35 the same as G4? ›

The G6. 35 lamps have the pins slightly further apart at 6.35mm as opposed to the 4mm separation of G4 bulbs. They can either be 12 volt or mains voltage 230VAC operation so check you get the correct ones.

Under the IEC code system, G6. 35 represents a bi-pin base with a 6.35mm pin spread and 1.0mm-diameter pins. A GY6. 35 base code represents a bi-pin base with a 6.35mm pin spread and a 1.25mm-diameter pin.

G6. 35 pins have a diameter of 1 millimeter while GY6. 35 pins are 1.25 millimeters in diameter. G8 and GY8, on the other hand, have differing pin lengths: G8 pins measure 8 millimeters long and GY8 pins measure 8.5 millimeters.

The EmeryAllen GY6.35:

These larger pins are primarily used to help older fixtures, whose contacts may have become heat stressed over the years with excessively hot halogen bulbs, to maintain a good grip on the bulb.

A G4 LED bulb is not always the same size as a G4 halogen bulb. If you have found the right product, the 1-to-1 replacement is very simple. First switch off the power. Then remove the old G4 halogen spot from the fixture.

Honda's KCW125 (the commercial name in Japan is "Spacy") was modified by Taiwan's Kwang Yang Motor Co., Ltd. (KYMCO), under Honda's consultancy, and became a standard model called the GY6, which various Taiwan makers imitated and minor-changed.

G6 - Globe Light Bulbs - BulbAmerica. menu. A G6 bulb has a diameter of 0.75 inches. We currently carry a wide selection of globe bulbs from industry-leading manufacturers including GE. Philips, and Satco.

A: Most 150 scooters use this GY6 motor. If the wheels are big (16") then it's a LONG case. Small wheel scooters use the SHORT case. There is one glaring difference on the rear brake.

A G4 light bulb is a bi-pin base lamp that runs off a low-voltage power supply. “G4” is a base designation which means the base has two pins and the gap width between the pins (center to center) is 4 millimeters.

Are G4 and G5 3 bulbs the same? ›

G4 Bulb. A G4 bulb is similar to GU5. 3 as it also has two-pins that are thin and small to connect into a lamp, however the difference is that it is usually used for decorative and atmospheric lighting.

A G4 light bulb is a bi-pin base lamp that runs off a low-voltage power supply. “G4” is a base designation which means the base has two pins and the gap width between the pins (center to center) is 4 millimeters. The G4 light bulb finds its usage in a variety of applications where space is a premium.

The G4 capsule bulb is a low-voltage push and fit lamp with 2 pins measuring 4 mm apart. G4 bulb base types are ideal for small, decorative fixtures, cabinet and specialist light fittings, projector lamps, dental lamps, fibre optic lamps, car, boat, and caravan lamps.

The Philips LED G4 and GU4 LED have similar names, but are not the same kind and can therefore not be replaced by each other. The G4 LED is a capsule bulb that, due to its compact size, is very suitable for small fixtures.

G4 Bi-Pin Bulbs – This lamp (like the MR16 and MR11) has two pins that are plugged into a socket. The pins, however, are narrower, and the lamp body may have several different shapes. The shapes are important since they determine whether or not the lamp fits into a specific fixture.